Gold nanoparticle decorated post

May 25, 2023

Scientific Reports volume 13, Article number: 9051 (2023) Cite this article

159 Accesses

Metrics details

In this report, the novel UiO‑66‑NH2 based-MOF(Zr) catalytic system which further modified with nitrogen-rich organic ligand (5-aminotetrazole) using post synthetic modification (PSM) approach has been prepared here as an efficient catalyst to promote the A3-coupling preparation of propargyl amines in green aquatic media. This newly highly efficient catalyst was synthesized upon Zr-based MOF (UiO‑66‑NH2) which successfully functionalized with 2,4,6‑trichloro‑1,3,5‑triazine (TCT) and 5‑aminotetrazole, following through stabilization of gold metal (Au) nanopartilces. The addition of N-rich organic ligand through post-synthesis modification which can be assisted to stabilize the bister and stable gold nanoparticles caused to unique structure of the final composite in favor of the progress of the A3 coupling reaction. Also several strategies comprising XRD, FT-IR, SEM, BET, TEM, TGA, ICP, EDS and elemental mapping analyzes, were used to indicate the successful preparation of the UiO-66-NH2@ Cyanuric Chloride@ 5-amino tetrazole/Au-NPs. The results of productivity catalyst are accomplished in good to excellent yields for all sort of reactions under mild conditions which is a proof of superior activity heterogeneous catalyst containing Au-nanoparticles. In addition, the suggested catalyst represented excellent reusability with no remarkable loss in activity up 9 sequential runs.

Synthetic progresses including three or more well-defined reactants to generate an ingredient which contains noteworthy fragments of all reactants, exquisitely all atoms as Multi-component reactions (MCRs) are concentrated1,2,3. Additionally, this class of responses suggests a higher level of atomic efficiency because of time-saving isolation, as well as filtration of synthetic intermediates. Lately, a multitude of MCRs, A3-type coupling reactions, involving amines, aldehydes by terminal alkynes, directly in a one-pot process, as a robust, valuable, and specific method for a set of complex molecules by noteworthy biological properties through the diverse elementary, as well as remarkable pioneers have been efficiently developed4,5,6,7. In the last few decades, the synthesis of propargylamines have been facinated attention, because of their great use as a pharmaceutical vital drug in medical field8,9,10. Preparation of propargylamines through the A3-coupling reaction gained broad attention, due to economical, easy availability, and adaptability, have been effectively developed in research as compatibility scaffolds of chemical methods and key intermediate drugs to combine biological-active nitrogenous scaffolds including, polyfunctional amino compounds, oxotremorine analogs, β-lactams, pyrrolidines, oxazoles, indolysines, pyrroles, triazolodiazepines as well as pesticides, insecticides, and also medicinal substances for treatment of Alzheimer's and Parkinson's disease11,12,13,14.

Activation of the C-H bond of the terminal alkyne is the main reason for the utilization of metal NPs for this reaction. Ag15, Cu16, and Au17 are some utilized metal NPs to promote this reaction. Gold nanoparticles, as one of the most widely utilized metals has been effectively applied in A3-coupling reactions due to its economical, availability and high potential for reactivity18,19,20. There are various reports regarding utilizing Au NPs as catalysts to promote the A3-coupling reaction8,21. Due to the ultrahigh sensitivity of the catalytic properties of the gold NPs to their size and shape, the utilization of supports for loading the NPs and preventing their aggregation is of great importance22,23,24. Porous organic polymers (POPs), coordination organic frameworks (COFs), silica mesoporous materials, and metal–organic frameworks are some of the utilized nano and micro-materials to prevent aggregation of Au NPs and modulate their catalytic properties25,26,27,28.

One of the most popular materials for the heterogenization of metal NPs is metal–organic frameworks (MOFs), a family of porous materials with tunable chemical and physical properties29,30. The designable structure of these materials leads to their broad application in various branches of chemistry, including catalysis, photocatalysis, electrocatalysis, adsorption, separation, drug delivery, and organic transformation. Moreover, post-synthesis modification (PSM) allows for the extensive tuning of the chemical and physical characteristics in MOF by implanting a wide variety of organic and inorganic functionalities31,32.

Synthesis of organic compounds in green aquatic solvents conditions is a specific topic in today's scientific community. Accomplishments within the field of green chemistry have opened up an awesome prospect for more prominent impacts on the efficiency and performance of chemicals whereas reducing their adverse effects, also facilitating the safety and wellbeing of incorporating mild conditions, as well expanding the scope of various organic reactions33,34.

Metal–organic frameworks (MOFs), known as a class of reticular nanoporous materials with designable chemical and physical characteristics, are one of the most commonly used materials for the heterogenization of metal NPs. While the metal NPs act as active catalytic centers, MOFs can add numerous features and functionalities to the composite35,36. A large number of organic and inorganic functionalities can be implanted in MOF via the post-synthesis modification (PSM) process, resulting in a high degree of chemical and physical properties tunability. Such a tunable structure of MOFs leads to their wide utilization in a plethora of applications. Sensing, drug delivery, catalysis, photocatalysis, electrocatalysis, adsorption, separation, organic transformation, etc., are just a portion of their applications. Judicious implantation of organic additives to the MOFs structure through PSM can boost their performance toward a specific application. Moreover, the PSM of MOFs can elevate their water resistance, which is one of their main drawbacks37,38,39,40,41.

UiO-66-NH2, with a Zr6O4(OH)4 inorganic cluster, is best known for its inherent stability in aquatic mediums due to the presence of Zr4+ ions in its inorganic clusters42. The high affinity of the negative carboxylic acids to the highly positive Zr4+ ions, along with the crowded secondary building block (SBU), hindering the accessibility of H2O molecules to the zirconia cluster, led to the exceptional stability of UiO-66 structure43,44. High stability, inherent open metal sites (OMSs), high surface area, and the presence of the amino group make UiO-66-NH2 a perfect candidate for the PSM. Amino groups of the organic linker can act as a binding center to modify the UiO-66-NH2 electronic structure for the desired applications45.

Here, we synthesized a UiO-66-NH2 MOF and employed a PSM procedure to modify its structure with N-rich organic ligand (5-aminotetrrazole). The obtained UiO-66-NH2@cyanuric chloride@5-amino tetrazole was used as support to load and heterogenize the Au NPs. Finally, we employed the UiO-66-NH2@cyanuric chloride@5-amino tetrazole/AuNPs as a catalyst for the promotion of the A3-coupling preparation of a series of propargyl amines. The designed catalyst exhibits a superior catalytic performance due to the modulation of the microenvironment of Au NPs via PSM of MOF. The suggested catalyst exhibits increased catalytic performance as a consequence of the PSM. Moreover, the proposed catalyst showed excellent recyclability up to 9 cycles. The addition of N-rich organic ligand through post-synthesis modification which can be assisted to stabilize the bister and stable gold nanoparticles caused to unique structure of the final composite in favor of the progress of the A3 coupling reaction.

All the applied materials and reagents in this work were purchased from merk and Sigma-Aldrich companies and used without further purification.

To synthesize UiO-66-NH2, (2.05 g, 0.011 mol) 2-aminoterephthalic acid (NH2-BDC) was poured to a three-neck round-bottom flask containing 65 mL N, N-Dimethylformamide anhydrous (dry DMF) under constant stirred for 10 min at room temperature. Then, (2.65 g, 0.011 mol) zirconium tetrachloride (ZrCl4) and 55 mL DMF were added to this solution. This solution was charged with 2.5 mL of concentrated HCl, and the reaction was carried out under reflux condition at inert argon atmosphere at 130 °C for 24 h. Finally, the yellow powder was separated from the reaction blend and washed with DMF and methanol three times. MOF was activated by soaking the as-synthesized UiO-66-NH2 in methanol for two days and drying under a vacuum at 60 °C.

Post-synthesis modification of UiO-66-NH2 was performed through the following procedure. First, 0.6 g cyanuric chloride was dissolved in 40 mL dry DMSO at 25 °C. Next, 1 g UiO-66-NH2 was added to the obtained solution and stirred for 24 h at 60 °C. the resulting solid was filtered and washed with DMSO for purification.

To a flask containing dry acetonitrile (30 ml), 1 g UiO-66-NH2@cyanuric chloride was added and stirred for 10 min. To another beaker containing 30 mL dry acetonitrile, 1 g of 5-amino tetrazole was added, stirred until it was completely dissolved. After that, the contents of 5-amino tetrazole dissolved in dry acetonitrile was poured to UiO-66-NH2@cyanuric chloride and stirred for 24 h at 60 °C. Finally, the precipitate was filtered, washed with acetonitrile, and dried at 45 °C.

First, 0.2 g of as-synthesized UiO-66-NH2@cyanuric chloride@5-aminotetrazole was added to the flask containing 35 mL of distilled water. Then, 0.045 g of Chloroauric acid (HAuCl4) was dissolved in 5 mL distilled water and added to the above balloon dropwise under vigorous stirring for 5 h at ambient temperature. Following, the reaction mixture was charged with 0.3 ml of freshly prepared hydrazine hydrate solution (3 drops of hydrazine hydrate in 3 ml of deionized water) and kept stirring at r.t for another 24 h. Consequently, the reaction mixture was separated using a 9000 rpm centrifuge, washed once with distilled water, and dried in an oven.

To investigate the catalytic performance of the proposed catalyst, the progress of the A3-coupling preparation of propargyl amines from the corresponding aldehydes (1 mmol), phenylacetylene (1.1 mmol), and the secondary amines (1 mmol) under the optimum condition was monitored (Table 2). Purification of the synthesized propargyl amines was performed by plate-chromatography. The chemical structure of the synthesized propargyl amines was probed by 1H NMR and 13C NMR (Supplementary information).

Following our previous attempts to develop facile and sustainable methodologies for developing various organic reactions, in this report, we introduce a highly efficient and recyclable gold-based catalyst for the promotion of the A3-coupling reaction for the preparation of the medicinally important propargyl amine derivatives from an aldehyde, an amine, and a terminal alkyne as the starting materials. First, the UiO-66-NH2 was prepared and modified with two N-rich organic ligands. A step-by-step PSM method was applied to introduce the cyanuric chloride and 5-amino tetrazole to the frameworks. Then, synthesized UiO-66-NH2@cyanuric chloride@5-amino tetrazole was used as support for the heterogenization of the Au NPs (Scheme 1). Finally, the manufactured UiO-66-NH2@cyanuric chloride@5-amino tetrazole/AuNPs was employed as a catalyst for the A3-coupling preparation of a series of propargyl amines.

Schematic synthesis of gold nanoparticle immobilized on UiO-66-NH2@cyanuric chloride.

The FT-IR spectra of UiO-66-NH2, UiO-66-NH2@cyanuric chloride, and UiO-66-NH2@cyanuric chloride@5-amino tetrazole are represented in figure. The F-IR spectra of bare UiO-66-NH2 (Fig. 1A) shows a broad peak at 1500–1600 and 3300–3500 cm-1, regarding the free and uncoordinated NH2 groups. Stretching vibrations of the C-N bonding of the H2BDC-NH2 are showing themselves at 1261 and 1338 cm-1. Cyanuric chloride modified MOF shows less intensity for the broad peak of the NH2 group at 3300–3500 cm-1, indicating less free and available uncoordinated NH2. Moreover, a new sharp peak at 1016 cm-1, which assigned the presence of cyanuric chloride in the compound (Fig. 1B). The same peak at 3300–3500 cm-1 disappeared from the IR spectra of the UiO-66-NH2@cyanuric chloride@5-amino tetrazole due to the coordination of 5-amino tetrazole to the cyanuric chloride. And also, the peak related to 1016 cyanuric chloride is no longer observed, which is a proof of the presence of 5-aminotetrazol (Fig. 1C). Other characteristic peaks of various parts of the composite overlapped, and other characterization methods were used to prove the formation of the catalyst.

FT-IR spectra of (A) UiO-66-NH2, (B) UiO-66-NH2@cyanuric chloride, and (C) UiO-66-NH2@cyanuric chloride@5-amino tetrazole.

The crystalline structure of as-synthesized UiO-66-NH2, UiO-66-NH2@cyanuric chloride, UiO-66-NH2@cyanuric chloride@5-amino tetrazole, UiO-66-NH2@cyanuric chloride@5-amino tetrazole/AuNPs, and the simulated XRD of UiO-66-NH2 in order to verify the successful preparation of UiO-66-NH2 are investigated by XRD technique (Fig. 2). The XRD pattern of bare UiO-66-NH2 reveals all the supposed characteristics which prove its crystallinity and successful synthesis (Fig. 2Aa). The XRD pattern of cyanuric chloride modified UiO-66-NH2 exhibits no noticeable change in comparison to the bare MOF, which proves that post-synthesis modification process did not affect the crystallinity (Fig. 2Ab). The XRD pattern of UiO-66-NH2@cyanuric chloride@5-amino tetrazole exhibit minor broadening in the XRD peaks of MOF, which shows that further modification leads to a minor loss of crystallinity, proving the successful modification (Fig. 2Ac). After the composition of UiO-66-NH2@cyanuric chloride@5-amino tetrazole with gold NPs, four new peaks appear, which correspond to standard Bragg reflections (111), (200), (220), and (311) of face centers cubic lattice of gold NPs (Fig. 2Ad). This spectra also exhibits all the characteristics of UiO-66-NH2, with a minor shift to higher 2θ which is a natural result of the composition, proving that the MOF preserve its crystalline structure through all the synthesis process. Moreover, the XRD pattern of the simulated XRD of UiO-66-NH2 in order to verify the successful preparation of UiO-66-NH2 reveals all the supposed characteristics which prove its crystallinity and successful synthesis (Fig. 2B).

(A) XRD spectra of (a) UiO-66-NH2, (b) UiO-66-NH2@cyanuric chloride, (c) UiO-66-NH2@cyanuric chloride@5-amino tetrazole, and (d) UiO-66-NH2@cyanuric chloride@5-amino tetrazole/AuNPs. (B) The simulated XRD of UiO-66-NH2 to verify the successful preparation of UiO-66-NH2.

N2 adsorption–desorption experiment was conducted for bare and modified UiO-66-NH2 at 77 K to determine the porosity of the MOF. Brunauer–Emmett–Teller (BET) was conducted to calculate the surface area of the samples (Fig. 3a). The adsorption–desorption isotherm of the bare UiO-66-NH2 shows a type I isotherm, which suggests the microporosity of its structure, with a surface area of 375 cm3 g-1. The BJH plot of UiO-66-NH2 confirms the microporosity of its matrix. This plot shows only one type of micropore in the bare MOF structure with a pore diameter of 1.21 nm (Fig. 3c). The modified MOF shows a dramatic decrease in surface area from 375 to 149 cm3 g-1. This result is a consequence of the successful PMS of MOF, in which the cyanuric chloride and 5-amino tetrazole filled the pores of UiO-66-NH2 and reduced its surface area (Fig. 3b, d).

The BET (a) and BJH (c) of of UiO-66-NH2. The BET (b) and BJH (d) of UiO-66-NH2@cyanuric chloride@5-amino tetrazole.

The morphology and surface structure of UiO-66-NH2@cyanuric chloride@5-amino tetrazole/AuNPs are investigated by SEM and TEM techniques (Fig. 4a–f). SEM images show the coarse surface of UiO-66-NH2 after the post-synthesis modification process, which is a natural result of the PSM and composition with the gold NPs (Fig. 4a). Because of the obtained results from the BET, showing that the pores of the MOF are laden due to the PSM, we try to use the surface of the modified MOF as a stand to load the Au NPs. In this context, we used hydrazine hydrate as a reductant, which results in the formation of bigger NPs compared to other reductants such as NaBH4, hoping to form AuNPs over the surface of modified MOF. TEM image exhibits the presence of well-dispersed Au NPs over the surface of UiO-66-NH2 (Fig. 4b–d) EDS and elemental Mapping (Fig. 4g, h).

(a) SEM, (b, c) TEM, (d) magnified TEM for selected part of (c). (e) SEM-Mapping and (f) STEM of UiO-66-NH2@cyanuric chloride@5-amino tetrazole/AuNPs, (g) EDS, (h) Mapping.

The TGA and DTA profile of UiO-66-NH2 is represented in Fig. 5a. The TGA curve exhibits a two-step weight loss. The first step occurs during the first 280 °C, concerned with the loss of adsorbed gas and coordinated hydroxyl groups to the zirconium cluster. The second step occurs between 280 and 800 °C, ascribed to the destruction of the frameworks. The final residue for the bare UiO-66-NH2 is 33.18%, which is the remaining zirconium oxide weight. The TGA curves of the UiO-66-NH2@cyanuric chloride and UiO-66-NH2@cyanuric chloride@5-amino tetrazole show the same weight loss profile as the UiO-66-NH2 with the final residue of 38.43% and 37.03% respectively, indicating the higher thermal resistance of modified MOF (Fig. 5b and c).

TGA and DTA profiles of (a) UiO-66-NH2, (b) UiO-66-NH2@cyanuric chloride, and (c) UiO-66-NH2@cyanuric chloride@5-amino tetrazole.

After careful characterization of the as-synthesized UiO-66-NH2@Cyanuric Chloride@5-Aminotetrazole@AuNPs, we evaluate its catalytic performance for the A3-coupling preparation of a series of propargylamine products. To this end, we choose the reaction of benzaldehyde, piperidine, and phenylacetylene as the model reaction. We also examined the effects of the reaction time and temperature, the type of solvent, and the catalyst dosage on the progress of the reaction, and the results are depicted in Table 1. To find the best solvent, the progress of the A3-coupling reaction of the model reaction in the presence of the proposed catalyst in various solvents, including water, toluene, DMSO, DMF, CH2Cl2, MeCN, a mixture of EtOH and H2O, EtOH, tetrahydrofuran, and solvent-free condition was monitored. Despite the remarkable performance of our proposed method in solvent-free conditions, further studies were carried out with H2O (3 ml) as the solvent due to its green nature and ease of employment. Studies on the effect of the temperature on the progress of the reaction showed that the best results were obtained at 65 °C, and a further increase in the temperature did not increase the yield of the reaction. We monitored the progress of the reaction by the thin-layer chromatography technique, and we observed that at 65 °C in H2O, the reaction reached equilibrium after 150 min, 2.5 h. The ideal amount of the catalyst was obtained by tracking the progress of the reaction in the presence of various catalyst dosages. The results of this study indicated that 25 mg, 0.02 molar of the proposed catalyst is sufficient for the optimal progress of the A3-coupling reaction. So, based on these studies, 25 mg of UiO-66-NH2@Cyanuric Chloride@5-Aminotetrazole@AuNPs catalyst at 65 °C in H2O and after 150 min results in the highest yields.

After obtaining the optimum condition, we test the generality of our proposed method by synthesizing different propargyl amines from various precursors. In this context, diverse aldehydes and amines reacted with the phenylacetylene in the presence of the proposed catalyst and the optimum conditions. Table 2 summarizes the outcomes of this study. As this table indicates, the reaction proceeds in excellent yields in the presence of aromatic aldehydes containing electron donating or withdrawing groups in the aromatic ring's ortho or para positions. However, employing an aliphatic aldehyde resulted in lower yields. We used three different secondary amines in this reaction, and as shown in Table 2, the change in the amine did not affect the yield of the reaction. These results indicate the excellent performance of the UiO-66-NH2@Cyanuric Chloride@5-Aminotetrazole/AuNPs as a catalyst for the promotion of the A3-coupling preparation of the propargyl amines.

To see if the modulation of the microenvironment around the Au NPs by PSM of UiO-66-NH2 affects the promotion of the A3-coupling reaction, we monitored the formation of all the synthesized propargyl amine derivatives in the presence of Au NPs decorated UiO-66-NH2, UiO-66-NH2@Cyanuric Chloride, and UiO-66-NH2@Cyanuric Chloride@5-Aminotetrazole (Table 3). These tests were performed at the optimum conditions (25 mg, 0.02 mol catalyst, 65 °C, H2O, 150 min or 2.5 h) to compare the results. Table 3 indicates that each step of the PSM successfully modified the electronic structure of the chemical surrounding of the Au NPs, resulting in the improvement of the yield of the reaction. Based on this study, UiO-66-NH2@Cyanuric Chloride@5-Aminotetrazole/ AuNPs is the optimum catalyst for promoting propargyl amines preparation via the A3-coupling reaction Table S1.

The catalyst's ability to be used several times for the same reaction is a defining factor for its industrial applications. To investigate the recyclability of our proposed catalyst, we separated the catalyst from the reaction medium by filtration and washed it with ethyl acetate several times for purification. Then, we applied the recycled catalyst to the model reaction for nine cycles and evaluated its performance. As shown in Fig. 6, no decrease in the catalyst performance was observed for four cycles, and even after six runs, its catalytic performance is still above 90% of its first use. This excellent reusability could be due to the high resistance nature of the UiO-66-NH2 MOF to the aquatic medium. Moreover, the post-synthesis modification of the UiO-66-NH2 filled the pores of MOF, limiting water molecules from accessing the zirconium cluster and increasing its stability.

The recyclability of UiO-66-NH2@Cyanuric Chloride@5-Aminotetrazole@AuNPs catalyst.

Table 3 compares the catalytic performance of UiO-66-NH2@Cyanuric Chloride@5-Aminotetrazole@AuNPs with some of the reported catalysts in the literature for the three-component preparation of propargyl amines. This table indicates that our proposed catalyst exhibits one of the highest reported yields. This could be due to the careful modification of the electronic structure of the UiO-66-NH2 via the post-synthesis modification process with nitrogen-rich ligands. The presence of cyanuric chloride and 5-Aminotetrazole alters the electronic structure of the UiO-66-NH2, leading to the boosting of the catalytic ability of the gold NPs in the final composite.

The amount of gold (Au) loading measured via the result of ICP-OES to be used in the new catalyst was 0.84. Table 4 indicates the amount mol% of Au at every stage of reuses, which proves our proposed catalyst exhibits the highest activity reported yields. That was specify that the ICP investigation of the recuperated catalyst's exercises to assess reused illustrated a really slight diminish in gold (Au) leaching.

In this report, the UiO-66-NH2 was chosen as a support for the heterogenization of the Au NPs due to its high potential for PSM, surface area, and inherent structural resistance. PSM of the MOF was carried out by a step-by-step strategy, in which a series of N-rich organic compounds were coordinated to the NH2 groups of the organic ligand of the MOF. The resulting catalyst was hired to promote the A3-coupling reaction, which showed superior performance. The results of this study indicate that such high efficiency is a result of the modulation of the microenvironment of the gold NPs. The proposed catalyst exhibited superior recycling performance due to the inherent resistance of the UiO-66-NH2 MOF and the induced resistance due to the PSM. Additionally, the proposed catalyst was reusable up to nine times.

All data generated or analyzed during this study are included in this published article (and its Supplementary information files).

John, S. E., Gulati, S. & Shankaraiah, N. Recent advances in multi-component reactions and their mechanistic insights: A triennium review. Org. Chem. Front. 8, 4237–4287 (2021).

Article CAS Google Scholar

Patel, D. B., Parmar, J. A., Patel, S. S., Naik, U. J. & Patel, H. D. Recent advances in ester synthesis by multi-component reactions (MCRs): A review. Curr. Org. Chem. 25, 539–553 (2021).

Article CAS Google Scholar

Shaabani, A. et al. Multi-component reaction-functionalized chitosan complexed with copper nanoparticles: An efficient catalyst toward A3 coupling and click reactions in water. Appl. Organomet. Chem. 33, e5074 (2019).

Google Scholar

Uozumi, Y. & Kim, K. A3 coupling reactions on green-synthesized gold nanoparticles. Synfacts. 15, 0408 (2019).

Article Google Scholar

Nasrollahzadeh, M., Sajjadi, M., Shokouhimehr, M. & Varma, R. S. Recent developments in palladium (nano) catalysts supported on polymers for selective and sustainable oxidation processes. Coord. Chem. Rev. 397, 54–75 (2019).

Article CAS Google Scholar

Eckert, H. Diversity oriented syntheses of conventional heterocycles by smart multi component reactions (MCRs) of the last decade. Molecules 17, 1074–1102 (2012).

Article CAS PubMed PubMed Central Google Scholar

Nikoofar, K. & Yielzoleh, F. M. High-component reactions (hcrs): An overview of mcrs containing seven or more components as versatile tools in organic synthesis. Curr. Org. Synth. 19, 115–147 (2022).

Article CAS PubMed Google Scholar

Zarenezhad, E., Taghavi, R., Kamrani, P., Farjam, M. & Rostamnia, S. Gold nanoparticle decorated dithiocarbamate modified natural boehmite as a catalyst for the synthesis of biologically essential propargylamines. RSC adv. 12, 31680–31687 (2022).

Article ADS CAS PubMed PubMed Central Google Scholar

Xie, Y. et al. A highly efficient metal-free hydrocarbonylation of alkynes with propargylamines and water. Green Chem. 24, 1978–1982 (2022).

Article CAS Google Scholar

Valentini, F., Brufani, G., Latterini, L. & Vaccaro, L. Metal nanoparticles catalyzed C–C bond formation via C–H activation. In Advanced Heterogeneous Catalysts Volume 1: Applications at the Nano-Scale, 513–543 (ACS Publications, 2020).

Jesin, I. & Nandi, G. C. Recent advances in the A3 coupling reactions and their applications. Eur JOC. 2019, 2704–2720 (2019).

CAS Google Scholar

Ru, G.-X. et al. Recent progress towards the transition-metal-catalyzed Nazarov cyclization of alkynes via metal carbenes. Org. Biomol. Chem. 19, 5274–5283 (2021).

Article CAS PubMed Google Scholar

Pham, W. Principles of Molecular Probe Design and Applications. (Springer Nature, 2022).

do Carmo Carreiras, M., Ismaili, L. & Marco-Contelles, J. Propargylamine-derived multi-target directed ligands for Alzheimer's disease therapy. Bioorg. Med. Chem. Lett. 30, 126880 (2020).

Article PubMed Google Scholar

Mariconda, A., Sirignano, M., Costabile, C. & Longo, P. New NHC-silver and gold complexes active in A3-coupling (aldehyde-alkyne-amine) reaction. Mol. Catal. 480, 110570 (2020).

Article Google Scholar

Kiani, A., Alinezhad, H. & Ghasemi, S. Preparation immobilized Cu nanoparticles on modified metal-organic framework via linker design as an effective and highly efficient nanocatalyst for the synthesis of propargyl amines derivatives. Polycycl. Aromat Compd. 1–18 (2022).

Shi, Q., Qin, Z., Xu, H. & Li, G. Heterogeneous cross-coupling over gold nanoclusters. Nanomater. 9, 838 (2019).

Article Google Scholar

Asensio, J. M., Bouzouita, D., van Leeuwen, P. W. & Chaudret, B. σ-H–H, σ-C–H, and σ-Si–H bond activation catalyzed by metal nanoparticles. Chem. rev. 120, 1042–1084 (2019).

Article PubMed Google Scholar

Baroliya, P. K. et al. Supported metal nanoparticles assisted catalysis: A broad concept in functionalization of ubiquitous C−H bonds. ChemCatChem 13, 4655–4678 (2021).

Article CAS Google Scholar

Kalsi, D. et al. One-Pot multicomponent synthesis of allyl and alkylamines using a catalytic system composed of ruthenium nanoparticles on copper N-heterocyclic carbene-modified silica. ACS Catal. 12, 14902–14910 (2022).

Article CAS Google Scholar

Fernández, G., Bernardo, L., Villanueva, A. & Pleixats, R. Gold nanoparticles stabilized by PEG-tagged imidazolium salts as recyclable catalysts for the synthesis of propargylamines and the cycloisomerization of γ-alkynoic acids. N J C. 44, 6130–6141 (2020).

Article Google Scholar

Ndolomingo, M. J., Bingwa, N. & Meijboom, R. Review of supported metal nanoparticles: Synthesis methodologies, advantages and application as catalysts. J. Mater. Sci. 55, 6195–6241 (2020).

Article ADS CAS Google Scholar

Zhao, P., El-kott, A., Ahmed, A. E., Khames, A. & Zein, M. A. Green synthesis of gold nanoparticles (Au NPs) using Tribulus terrestris extract: Investigation of its catalytic activity in the oxidation of sulfides to sulfoxides and study of its anti-acute leukemia activity. Inorg. Chem. Commun. 131, 108781 (2021).

Article CAS Google Scholar

Subhan, F. et al. Confinement of Au, Pd and Pt nanoparticle with reduced sizes: Significant improvement of dispersion degree and catalytic activity. Micropor Mesopor Mat. 337, 111927 (2022).

Article CAS Google Scholar

Zhu, Q.-Q., Zhang, W.-W., Zhang, H.-W., Yuan, R. & He, H. Elaborately manufacturing an electrochemical aptasensor based on gold nanoparticle/COF composites for amplified detection performance. J. Mater. Chem C. 8, 16984–16991 (2020).

Article CAS Google Scholar

Yang, Y. et al. Highly selective reduction of nitroarenes with gold nano-catalysts immobilized in porous aromatic frameworks. Micropor. Mesopor. Mater. 306, 110393 (2020).

Article CAS Google Scholar

He, C. et al. Multifunctional gold nanoparticles@ imidazolium-based cationic covalent triazine frameworks for efficient tandem reactions. CCS Chem. 3, 2368–2380 (2021).

Article CAS Google Scholar

Su, Y., Li, X., Wang, Y., Zhong, H. & Wang, R. Gold nanoparticles supported by imidazolium-based porous organic polymers for nitroarene reduction. Dalton Trans. 45, 16896–16903 (2016).

Article CAS PubMed Google Scholar

Yang, Q., Xu, Q. & Jiang, H.-L. Metal–organic frameworks meet metal nanoparticles: Synergistic effect for enhanced catalysis. Chem. Soc. Rev. 46, 4774–4808 (2017).

Article CAS PubMed Google Scholar

Kalaj, M. & Cohen, S. M. Postsynthetic modification: An enabling technology for the advancement of metal–organic frameworks. ACS cent sci. 6, 1046–1057 (2020).

Article CAS PubMed PubMed Central Google Scholar

Kaur, M. et al. Post-synthesis modification of metal-organic frameworks using Schiff base complexes for various catalytic applications. J. Chem. Eng. 423, 130230 (2021).

Article CAS Google Scholar

Deria, P. et al. Beyond post-synthesis modification: Evolution of metal–organic frameworks via building block replacement. Chem. Soc. Rev. 43, 5896–5912 (2014).

Article CAS PubMed Google Scholar

Dallinger, D. & Kappe, C. O. Microwave-assisted synthesis in water as solvent. Chem. rev. 107, 2563–2591 (2007).

Article CAS PubMed Google Scholar

Lipshutz, B. H., Gallou, F. & Handa, S. Evolution of solvents in organic chemistry. ACS Sustain. Chem. Eng. 4, 5838–5849 (2016).

Article CAS Google Scholar

Kirchon, A., Feng, L., Drake, H. F., Joseph, E. A. & Zhou, H.-C. From fundamentals to applications: A toolbox for robust and multifunctional MOF materials. Chem. Soc. Rev. 47, 8611–8638 (2018).

Article CAS PubMed Google Scholar

Kitagawa, S. Metal–organic frameworks (MOFs). Chem. Soc. Rev. 43, 5415–5418 (2014).

Article PubMed Google Scholar

Ding, M., Cai, X. & Jiang, H.-L. Improving MOF stability: Approaches and applications. Chem. Sci. 10, 10209–10230 (2019).

Article CAS PubMed PubMed Central Google Scholar

Bai, Y. et al. Zr-based metal–organic frameworks: Design, synthesis, structure, and applications. Chem. Soc. Rev. 45, 2327–2367 (2016).

Article CAS PubMed Google Scholar

Wang, Q. & Astruc, D. State of the art and prospects in metal–organic framework (MOF)-based and MOF-derived nanocatalysis. Chem. Rev. 120, 1438–1511 (2019).

Article PubMed Google Scholar

Stock, N. & Biswas, S. Synthesis of metal-organic frameworks (MOFs): Routes to various MOF topologies, morphologies, and composites. Chem. Rev. 112, 933–969 (2012).

Article CAS PubMed Google Scholar

Burrows, A. D. Post-synthetic modification of MOFs. In Metal Organic Frameworks as Heterogeneous Catalysts. 31–75 (2013).

Yuan, S., Qin, J.-S., Lollar, C. T. & Zhou, H.-C. Stable metal–organic frameworks with group 4 metals: Current status and trends. ACS cent. sci. 4, 440–450 (2018).

Article CAS PubMed PubMed Central Google Scholar

Chen, Z. et al. Reticular chemistry in the rational synthesis of functional zirconium cluster-based MOFs. Coord. Chem. Rev. 386, 32–49 (2019).

Article CAS Google Scholar

Chen, Z., Hanna, S. L., Redfern, L. R., Alezi, D., Islamoglu, T. & Farha, O. K. Corrigendum to "Reticular chemistry in the rational synthesis of functional zirconium cluster-based MOFs"[Coord. Chem. Rev. 386 (2019) 32–49](S0010854518305514) (10.1016/j. ccr. 2019.01. 017). Coord. Chem. Rev. 400, 213050 (2019).

Sun, W. et al. Advances in metal-organic framework-based hydrogel materials: preparation, properties and applications. J. Mater. Chem. A 11(5), 2092–2127 (2023).

Article CAS Google Scholar

Dulle, J. et al. Efficient three-component coupling catalysed by mesoporous copper–aluminum based nanocomposites. Green Chem. 15, 1238–1243 (2013).

Article CAS Google Scholar

Kumar, V. V., Rajmohan, R., Vairaprakash, P., Mariappan, M. & Anthony, S. P. Copper-coordination polymer-controlled Cu@ N-rGO and CuO@ C nanoparticle formation: Reusable green catalyst for A3-coupling and nitroarene-reduction reactions. Dalton Trans. 46, 11704–11714 (2017).

Article Google Scholar

Hosseinzadeh, S. Z., Babazadeh, M., Shahverdizadeh, G. H., Es’haghi, M. & Hosseinzadeh-Khanmiri, R. Silica encapsulated-gold nanoparticles as a nano-reactor for aerobic oxidation of benzyl alcohols and tandem oxidative A3 coupling reactions in water. Catal. Lett. 150, 2784–2791 (2020).

Article CAS Google Scholar

Bonyasi, R., Gholinejad, M., Saadati, F. & Nájera, C. Copper ferrite nanoparticle modified starch as a highly recoverable catalyst for room temperature click chemistry: Multicomponent synthesis of 1, 2, 3-triazoles in water. N J C. 42, 3078–3086 (2018).

Article CAS Google Scholar

Huang, J.-L., Gray, D. G. & Li, C.-J. A3-coupling catalyzed by robust Au nanoparticles covalently bonded to HS-functionalized cellulose nanocrystalline films. Beilstein J. Org. Chem. 9, 1388–1396 (2013).

Article PubMed PubMed Central Google Scholar

Nouruzi, N. et al. Porous triazine polymer: A novel catalyst for the three-component reaction. Appl. Organomet. Chem. 34, e5677 (2020).

Article CAS Google Scholar

Veisi, H., Mohammadi, L., Hemmati, S., Tamoradi, T. & Mohammadi, P. In situ immobilized silver nanoparticles on rubia tinctorum extract-coated ultrasmall iron oxide nanoparticles: An efficient nanocatalyst with magnetic recyclability for synthesis of propargylamines by A3 coupling reaction. ACS Omega 4, 13991–14003 (2019).

Article CAS PubMed PubMed Central Google Scholar

Liu, L., Tai, X., Yu, G., Guo, H. & Meng, Q. Gold and silver nanoparticles supported on metal-organic frameworks: A highly active catalyst for three-component coupling reaction. Chem. Res. Chin. Univ S. 32, 443–450 (2016).

Article CAS Google Scholar

Maggi, R., Bello, A., Oro, C., Sartori, G. & Soldi, L. AgY zeolite as catalyst for the effective three-component synthesis of propargylamines. Tetrahedron 64, 1435–1439 (2008).

Article CAS Google Scholar

Movahedi, F., Masrouri, H. & Kassaee, M. Immobilized silver on surface-modified ZnO nanoparticles: As an efficient catalyst for synthesis of propargylamines in water. J. Mol. Catal. A: Chem. 395, 52–57 (2014).

Article CAS Google Scholar

Kassymova, M. et al. Post-synthetically modified MOF for the A3-coupling reaction of aldehyde, amine, and alkyne. Catal. Sci. Technol. 8, 4129–4140 (2018).

Article CAS Google Scholar

Liu, Y. et al. In situ construction of fibrous AgNPs/g-C3N4 aerogel toward light-driven COx-free methanol dehydrogenation at room temperature. Chem. Eng. J. 334, 2401–2407 (2018).

Article CAS Google Scholar

Wei, C. & Li, C.-J. A highly efficient three-component coupling of aldehyde, alkyne, and amines via C−H activation catalyzed by gold in water. J. Am. Chem. Soc. 125, 9584–9585 (2003).

Article CAS PubMed Google Scholar

Nasrollahzadeh, M., Sajadi, S. M. & Rostami-Vartooni, A. Green synthesis of CuO nanoparticles by aqueous extract of Anthemis nobilis flowers and their catalytic activity for the A3 coupling reaction. J. Colloid Interface Sci. 459, 183–188 (2015).

Article ADS CAS PubMed Google Scholar

Abdollahi-Alibeik, M. & Moaddeli, A. Copper modified spherical MCM-41 nano particles: An efficient catalyst for the three-component coupling of aldehydes, amines and alkynes in solvent-free conditions. RSC Adv. 4, 39759–39766 (2014).

Article ADS CAS Google Scholar

Gholinejad, M., Afrasi, M. & Najera, C. Caffeine gold complex supported on magnetic nanoparticles as a green and high turnover frequency catalyst for room temperature A3 coupling reaction in water. Appl. Organomet. Chem. 33, e4760 (2019).

Article Google Scholar

Aghbash, K. O., Alamgholiloo, H., Pesyan, N. N., Khaksar, S. & Rostamnia, S. Gold nanoparticle stabilized dithiocarbamate functionalized magnetite carbon as promise clean nanocatalyst for A3-coupling organic transformation. Mol. Catal. 499, 111252 (2021).

Article CAS Google Scholar

Download references

The authors would like to thank the Materials and Energy Research Center (Grant No.: 9911940) for the financial support of this project.

Department of Nano Technology and Advanced Materials, Materials and Energy Research Center, Karaj, Iran

Leila Mohammadi & Mohammad Reza Vaezi

Organic and Nano Group (ONG), Department of Chemistry, Iran University of Science and Technology (IUST), PO BOX 16846-13114, Tehran, Iran

Reza Taghavi & Sadegh Rostamnia

Department of Energy, Materials and Energy Research Center, Karaj, Iran

Mojtaba Hosseinifard

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

L.M. design and synthesis of MOF-catalyst, synthesis of propargylamines desired and edited the paper;R.T. help to write;M.H. edit the paper;M.R.V. as supervisor;S.R. edit the paper.

Correspondence to Mojtaba Hosseinifard or Mohammad Reza Vaezi.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Mohammadi, L., Taghavi, R., Hosseinifard, M. et al. Gold nanoparticle decorated post-synthesis modified UiO-66-NH2 for A3-coupling preparation of propargyl amines. Sci Rep 13, 9051 (2023). https://doi.org/10.1038/s41598-023-35848-4

Download citation

Received: 30 October 2022

Accepted: 24 May 2023

Published: 03 June 2023

DOI: https://doi.org/10.1038/s41598-023-35848-4

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.